10G multi-mode SFP-10G-SR is an optical transceiver (also called fiber optic transceiver) used for multi-mode optical fiber. It can transmit high-speed data over short distances, with a maximum transmission distance of up to 300 meters. Compared with single-mode optical transceivers, multimode fiber transceiver is lower in cost but have shorter transmission distances. The 10G multi-mode optical transceiver SFP-10G-SR is an ideal choice for transmitting data using multi-mode optical fiber. This article explains the characteristics, scope of application, how to use it correctly and some precautions during use of the 10G multi-mode SFP-10G-SR optical transceiver.
High-speed transmission: Data transmission can be carried out at a rate of up to 10Gbps.
Short-distance transmission: The longest transmission distance is 300 meters, suitable for data centers and local area networks with short distances.
Easy to use: 10G multi-mode SFP-10G-SR is a small, hot-swappable transceiver that is easy to install and replace.
10G multi-mode SFP-10G-SR has been widely used in data centers and local area networks. Mainly used to connect servers, storage devices and network switches. For data centers and enterprise networks, high-speed, reliable and low-latency data transmission is very necessary. 10G multi-mode SFP-10G-SR optical transceiver makes data centers and enterprise networks more efficient and reliable.
10G multi-mode SFP-10G-SR is widely used in data centers and local area networks, mainly used to connect servers, storage devices and network switches. For data centers and enterprise networks, high-speed, reliable and low-latency data transmission is very necessary. 10G multi-mode SFP-10G-SR optical transceiver makes data centers and enterprise networks more efficient and reliable.
Data center internal network
LAN
Connection between server and network switch
Connection between storage devices and network switches
The 10G multi-mode SFP-10G-SR optical transceiver can help users achieve high-speed, reliable and low-latency data transmission, but to ensure its normal operation, it also needs to be used correctly. The following are some precautions for the correct use of 10G multi-mode SFP-10G-SR optical transceivers:
1. Choose the right optical fiber: 10G multi-mode SFP-10G-SR is suitable for OM3 and OM4 multi-mode optical fiber, not suitable for OM1 and OM2 optical fiber. Be sure to choose the correct optical fiber, otherwise data transmission will be affected.
2. Pay attention to plugging and unplugging: the optical transceiver is hot-swappable, but you must be careful during the plugging and unplugging process and do not use excessive force, otherwise the transceiver may be damaged.
3. Correct connection: After inserting the optical transceiver, be sure to make sure it is connected correctly. The optical port of the optical transceiver corresponds to the optical port of the optical fiber and is connected using the corresponding interface optical cable.
4. Keep clean: The optical transceiver connector and fiber optic connector must be kept clean and dust-free, otherwise the working effect of the optical transceiver may be affected.
5. Avoid bending: Try to avoid bending or pulling the optical fiber during the wiring process, which may damage the optical fiber and optical transceiver.
To sum up, 10G multi-mode SFP-10G-SR is an ideal choice for high-speed, reliable and low-latency data transmission, but to ensure its normal operation, it needs to be used correctly. Precautions such as proper fiber selection, careful plugging and unplugging, proper connection, keeping clean, and avoiding bends should be kept in mind to ensure optimal data transmission.
