40G sfp+ active optical cable is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. The AOC is terminated with a QSFP28 module at one end and four SFP28 modules at the other. With the QSFP28 terminal, 40g aoc cable offers 4 independent data transmission channels and 4 data receiving channels via an 8-core multimode fiber cable, each capable of 25Gb/s operation. The fiber cable then fans out to four dual-core fiber cables, each of which is terminated with an SFP28 module. Consequently, an aggregate data rate of 100Gb/s over up to 100m transmission can be achieved by this qsfp+ active optical cable product, to support the ultra-fast computing data exchange.
The product is designed with form factor, optical/electrical connection according to the QSFP28 and SFP28 Multi-Source Agreements (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
QSFP-4✖10G AOC15M | 15M 40G QSFP+ to 4✖10G SFP+ AOC |
QSFP-4✖10G AOC10M | 10M 40G QSFP+ to 4✖10G SFP+ AOC |
QSFP-4✖10G AOC7M | 7M 40G QSFP+ to 4✖10G SFP+ AOC |
QSFP-4✖10G AOC5M | 5M 40G QSFP+ to 4✖10G SFP+ AOC |
QSFP-4✖10G AOC3M | 3M 40G QSFP+ to 4✖10G SFP+ AOC |
EX-QSFP-8LC-AOC30M | 30m (98ft) 40G QSFP+ to 4 Duplex LC Breakout Cable |
EX-QSFP-8LC-AOC20M | 20m (66ft) 40G QSFP+ to 4 Duplex LC Breakout Cable |
EX-QSFP-8LC-AOC15M | 15m (49ft) 40G QSFP+ to 4 Duplex LC Breakout Cable |
EX-QSFP-8LC-AOC10M | 10m (33ft) 40G QSFP+ to 4 Duplex LC Breakout Cable |
EX-QSFP-8LC-AOC5M | 5m (16ft) 40G QSFP+ to 4 Duplex LC Breakout Cable |
40G-QSFP-4SFP-AOC-2001 | 20m 40G QSFP+ to 4 SFP+ Breakout AOC |
40G-QSFP-4SFP-AOC-1501 | 15m 40G QSFP+ to 4 SFP+ Breakout AOC |
40G-QSFP-4SFP-AOC-0701 | 7m 40G QSFP+ to 4 SFP+ Breakout AOC |
40G-QSFP-4SFP-AOC-0501 | 5m 40G QSFP+ to 4 SFP+ Breakout AOC |
40G-QSFP-4SFP-AOC-0301 | 3m 40G QSFP+ to 4 SFP+ Breakout AOC |
40G-QSFP-4SFP-AOC-0101 | 1m 40G QSFP+ to 4 SFP+ Breakout AOC |
40G-QSFP-4SFP-AOC-1001 | 10m 40G QSFP+ to 4 SFP+ Breakout AOC |
10GB-4-F10-QSFP | 10m 40G QSFP+ to 4 SFP+ Breakout AOC |
10GB-4-F05-QSFP | 5m 40G QSFP+ to 4 SFP+ Breakout AOC |
10GB-4-F03-QSFP | 3m 40G QSFP+ to 4 SFP+ Breakout AOC |
10GB-4-F01-QSFP | 1m 40G QSFP+ to 4 SFP+ Breakout AOC |
10GB-4-F20-QSFP | 20m 40G QSFP+ to 4 SFP+ Breakout AOC |
The operation in excess of any absolute maximum ratings might cause permanent damage to this module.
Parameter | Symbol | Min | Max | Unit | Notes |
Storage Temperature | TST | -40 | 85 | degC | |
Relative Humidity(non-condensing) | RH | 0 | 85 | % | |
Operating Case Temperature | TOPC | 0 | 70 | degC | |
Supply Voltage | VCC | -0.3 | 3.6 | V | |
Input Voltage | Vin | -0.3 | Vcc+0.3 | V |
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Operating Case Temperature | TOPC | 0 | 70 | degC | Operating Case Temperature | |
Power Supply Voltage | VCC | 3.13 | 3.3 | 3.47 | V | Power Supply Voltage |
Data Rate | DR | 10.3 | 11.3 | Gbps | Data Rate | |
Data Speed Tolerance | ∆DR | -100 | +100 | ppm | ||
Link Distance with OM3 fiber | D | 0 | 100 | m | ||
Control* Input Voltage High | Vih | 2 | VCC+0.3 | V | ||
Control* Input Voltage Low | Vil | -0.3 | 0.8 | V | ||
I2C Serial Interface frequency | fs | 400k | Hz | |||
Power Supply Noise | 50 | mVpp | ||||
Receiver Differential Data Output Load | 100 | mVpp |