The DAC high-speed cable is a fixed-length cable assembly with fixed connectors at both ends. The connectors of dac cable have no optical lasers and other components. So direct attach cable can only transmit electrical signals, but not optical signals. dac direct attach cable is a low-cost and high-efficiency Communication solutions which can greatly save cost and power consumption in short-distance applications.
Besides direct attach cable, Gearlink professional optical transceiver manufacturer also provide a variety of transceivers such as 400g transceiver, 40g qsfp+ transceiver, active optical cables, module sfp 10g, sfp transceiver, etc.
Single 3.3V power supply
Temperature Range: 0~ 70 °C
Operating temperature: -40℃ to +80℃
Optimized construction to minimize insertion loss and cross talk
Backward compatible with existing QSFP+ connectors and cages
Pull-to-release slide latch design
26AWG through 30AWG cable
Straight and break out assembly configurations available
Customized cable braid termination limits EMI radiation
Customizable EEPROM mapping for cable signature
10G Ethernet
25G Ethernet
100G Ethernet
40G Ethernet
Switches, servers, and routers
Data Center networks
Storage area networks
High-performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
GearLink's DAC can be divided into 10G DAC, 25G DAC, 40G DAC, and 100g dac cable according to the transmission rate.
DAC means direct cable or direct-connected copper cable, a cable assembly with fixed connectors at both ends, the module and copper cable cannot be separated.
The function of the optical module is photoelectric conversion, but the module connected on DAC has no optical devices and electronic components, so it can only transmit electrical signals.
The full name of DAC high-speed cable is Direct Attach Cable, and we generally call it high-speed cable. Fixed-length cable assemblies with fixed connectors at both ends, non-replaceable connectors, modular connectors and copper cables that cannot be separated. DAC is generally used for short-distance transmission and only transmits electrical signals.
The transmission distance of DAC is very short, generally only up to 7 meters. The application scenario of DAC is generally to connect and transmit in the same rack or adjacent racks in a short distance. In the face of different network requirements, DACs with different rates can also be selected. DAC rates are 10G, 25G, 40G, 100G, 200G, 400G, etc. DACs are mostly used in data centers.
DACs are generally used in short-distance transmission networks, plugged into an optical port of the corresponding rate, and connected to another optical port of the same rate in the same rack or an adjacent rack. The connection light is on. The price of DAC is also relatively cheap compared to two transceiver s plus a jumper.
