Email Us
+86 027-87887588
+86 18971538004
xiangling@whgearlink.com
En
Products

SFP 1.25G Tx1550/Rx1310 3Km LC Transceiver

BIDI SFP+
BIDI SFP+
Fiber Transceiver
SFP 1.25

Gearlink’s SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser(the 1550nm FP laser), and the PIN/TIA. The module data link up to 3km in 9/125um Single-mode fiber.


This sfp 1.25 transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.


The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.

Compatibility of SFP 1.25G Tx1550/Rx1310 3Km LC Transceiver

Cisco
GLC-BX-D1000BASE-BX3-D SFP BIDI  1550nm-TX/1310nm-RX 3km


Technical Specification Of SFP 1.25G Tx1550/Rx1310 3Km LC Transceiver


General Specifications

Parameter

Symbol

Min

Typ.

Max

Unit

Bit Rate

BR



1.25

Gb/s etc

Max.Supported Link Length

Max



10

km


Absolute Maximum Ratings

Parameter

Symbol

Min

Typ.

Max

Unit

Ref.

Storage Temperature

TS

-40


85

ºC


Storage Ambient Humidity

HA

5


95

%


Power Supply Voltage

VCC

-0.5


4

V


Signal Input Voltage


-0.3


Vcc+0.3

V


Receiver Damage Threshold


+3



dBm


Lead Soldering Temperature/Time

Told



260/10

ºC/sec

Note 1

Lead Soldering Temperature/Time

Told



360/10

ºC/sec

Note 2

Notes:

1. Suitable for wave soldering.

2. Only for soldering by iron.


Parameter Of SFP 1.25G Tx1550/Rx1310 3Km LC Transceiver

BIDI SFP+ Fiber Transceiver

Technical Documents Of SFP 1.25G Tx1550/Rx1310 3Km LC Transceivers

whgearlink
Get in touch with WHGearlink Optical Transceiver Experts to get professional support and helps within 24 hours.
No.1120, Building 12, Changhang Lanjing International, Hongshan district, Wuhan city, Hubei province, China, 430000.
xiangling@whgearlink.com
+86 027-87887588